-- RamonaValenzuelaPerez - 2012-06-21

Proton Detector: Charged Fusion Products Diagnostic

Please note that though Florida International Univeristy (FIU) is collaborating with the Princeton Plasma Physics Laboratory and the Culham Centre for Fusion Energy (CCFE), this TWiki page is maintained by FIU collaborators and the page is hosted by FIU. Please see the CCFE Information section for the address of the Wiki page maintained and hosted by the CCFE.

Proton Detector (PD)

The Proton Detector’s (PD) data will yield pulse height spectra created by Protons and Tritons emitted from the plasma during Neutral Beam Injection. Validation of the subsequent PD fast ion emission plasma profile will involve MAST Neutron Camera data. Preliminary testing of PD electronics and data acquisition software occurred during neutral beam, toroidal field coil, poloidal field coil, and ELM coil testing in March 2013. Probe head manufacturing and software development will continue to prepare for a July 2013 installation in MAST. [Excerpt contributed to the Annual Report of the EURATOM/CCFE Fusion Programme 2012/13]

Summer Data Collection

• Diagnostic installation: July 29th - August 2nd 2013
• Data collection: August 5th - August 23rd 2013
• Parasitic data collection: September 3rd - September 12th 2013
• PPPL onsite collaborators: Doug Darrow
• FIU onsite collaborators: Werner Boeglin, Ramona Perez, Adrianna Angulo, Pierre Avila, Omar Leon, Carlos Lopez

Dates are based upon RP/DSF Schedule Last Updated on 25/4/2013

Electrical Design Review

Date

• Wednesday June 19th, 2013
• 9:00 AM FL, 14:00 Culham

Attendees

• FIU: Adrianna Angulo, Werner Boeglin, Omar Leon, Ramona Perez
• MAST: Scott Y Allan, Richard Martin, Ken McClements, Paul Stevenson, Nigel Thomas-Davies
• PPPL: Doug Darrow

EDR Materials

• EDR_presentation_061913.pdf
• EDR_written.pdf
• Diagram_PD_cable_block_diagram.pdf
• Diagram_PD_Data_Collection_sequence_diagram.pdf
• MD05 Electrical Drawing provided by Scott Y Allan

Supporting Documents (for reference if needed)

• Cable_5106C_specs.pdf - Cable_FC1_specs.pdf - Cable_LMR195_specs.pdf - Cable_UHV_specs.pdf - PEEK_properties.pdf
• Equipment_Adnaco-S2-DS.pdf - Equipment_Amplifier.pdf - Equipment_Computer.pdf - Equipment_Digitizer_specs.pdf - Equipment_FerriteCores_specs.pdf
• Equipment_Preamplifier.pdf - PowerSupply_ADNACO_specs.pdf -PowerSupply_ADNACO_image.pdf - PowerSupply_Computer_specs.pdf - PowerSupply_Computer_image.pdf - Safety_Computer_PowerSupply_pg14.pdf

Noise Testing

Dates

• Onsite noise testing: March 2013
• Remote noise testing: March - May 2013

Collaborators travelling to MAST

• Ramona Perez: March 11th - March 24th 2013
• Werner Boeglin: March 11th - March 15th 2013
• Doug Darrow: March 11th - March 20th 2013

Instructions to run DAQ Program (if need be)

• NIGEL_SCOTT_RUN_DAQ_PROGRAM.pdf
• To restart computer press Alt+fn+F4 to bring up shutdown options (select restart)

Information for sending equipment back to FIU after remote testing

• Information_PD_Remote_Data_Collection_Shipment.pdf

Radiation source

• WCP_792_1.pdf
• RA_82116.PDF
• ff357_detector_calibration_MAST_Area_20130314_v2.rtf

Electrical Design

• cable_block_diagram.pdf
  
• All cable lengths used will be the same for the July data collection
• MAST reciprocating probe cable lengths were simulated for noise testing

Mechanical Design

• Changes to probe head orientation angles made during noise testing

March 19th, 2013 Noise Testing Group Meeting

• Presentation group_discussion_031913_comments.pdf

Prototype

Installation: January 2013

Comments:

• Prototype type dimensions fit into RP access cube (reduction in probe head diameter requested for greater ease of installation)
• Our prototype RP connector may have become distorted during the welding of the connector to the prototype shell (this issue was fixed at CCFE)
• A dummy RP shaft end was created and sent to FIU to test the fit of the RP connector before bringing the diagnostic for the summer data collection
• Vacuum vent hole had to be drilled in top of prototype to bake for RP installation (at CCFE)

Machine Drawings:

• dummy_head.pdf

Mechanical Design Review

Current Mechanical Design

• June 2013
• Reflects new length less than 185mm and diameter of 110mm
• PD_22_Design_062013.pdf

MAST Mechanical Design Review Materials

Date

• September 9th, 2012

Materials

• MAST Design Review Presentation Part2 Design_Review_CFPD_part2.pdf
• Machine Drawings Part 1 (does not include replicated MAST parts) Machine_Drawings_CFPD.pdf
• Machine Drawings Part 2 (replicated MAST parts) Machine_Drawings_Replication_MAST_Parts.pdf

Supporting Documents (for reference if needed)

• Electronics Schematic Data_Acquisition_Schematic.pdf
• Data Acquisition Specifications Summary Chart Data_Acquisition_Specifications_Chart.pdf
• General vacuum cable properties vacuum_cable_properties.pdf
• Specific vacuum cable (PN100720) vacuum_cable_part_number_100720.pdf
• Please contact me if you need any more information regarding material properties, cable properties, or hardware specifications.

Preliminary Mechanical Design - MAST

Date

• June 26th, 2012

Materials

• notes (MAST & PPPL) and MAST Design Presentation (inches/ASME) Design_Presentation_061912_allnotes_inches.pdf
• notes (MAST & PPPL) and MAST Design Presentation (metric) Design_Presentation_061912_allnotes_metric.pdf

Preliminary Mechanical Design - PPPL

Date

• June 19th, 2012

Materials

• MAST Design Machine Drawings (Rough Draft in inches/ASME) MAST_design_machine_drawings_061912.pdf
• notes and MAST Design Presentation (inches/ASME) Design_Presentation_061912_notes_1.pdf
• notes and MAST Design Presentation (metric) Design_Presentation_061912_notes_metric.pdf

FIU Experimental Plasma Physics (FEPP) Group Information

• FEPP group page: http://phy.fiu.edu/twiki/bin/view/TWiki/FEPP
• Proceedings of the 18th Topical Conference on High-Temperature Plasma Diagnostics, Wildwood, New Jersey, May 2010
  • Rev. Sci. Instrum. 81, 10D301 (2010); doi: 10.1063/1.3464262
• Group Members
  • PI: Werner Boeglin http://physics.fiu.edu/faculty/
  • Graduate Student: Ramona V Perez http://phy.fiu.edu/twiki/bin/view/Main/RamonaValenzuelaPerez
    • Dissertation Research Proposal related to Proton Detector http://phy.fiu.edu/twiki/bin/view/TWiki/Proposal
  • Undergraduate Students: Adrianna Angulo, Pierre Avila, Omar Leon, Carlos Lopez

CCFE Information

• The CCFE Proton Detector wiki page:
  • http://fusweb1.fusion.culham.ukaea.org.uk/fusionwiki/index.php/M9:Proton_detector_and_neutron_camera_measurements_during_short_MHD
• The CCFE Proton Detector Design Review page (under 2012):
  • http://fusweb1.fusion.culham.ukaea.org.uk/fusionwiki/index.php/Design_Reviews
• The CCFE Proton Detector Diagnostic Page:
  • http://fusweb1.fusion.culham.ukaea.org.uk/fusionwiki/index.php/Proton_Detector
• Remote log on: https://citrix.ccfe.ac.uk/
• MAST Monitor Control Room Display: within the CCFE newtork go to http://intranet.ccfe.ac.uk/ then to "FusionWiki intranet" then to "Status" then to "Real-time"
• Session Log for MAST shots
  • Current Day: within the CCFE newtork go to http://intranet.ccfe.ac.uk/ then to "FusionWiki intranet" then to "Results and Analysis" section and "Session Logs" subsection to "Today"
  • Past Dates: within the CCFE newtork go to http://intranet.ccfe.ac.uk/ then to "FusionWiki intranet" then to "Results and Analysis" section and "Session Logs" subsection to "SL"
    • Click on the shot number to open a pdf which has a collection of waveforms from plasma and toroidal field currents to the neutron rate
  • Quick Search for Shot Data: within the CCFE newtork go to http://intranet.ccfe.ac.uk/ then to "FusionWiki intranet" then to "Results and Analysis" section and "Displays" subsection to "Data"
    • Enter the shot number and select relevant data to view
• XPAD information: within the CCFE network go to http://fusweb2.fusion.culham.ukaea.org.uk/ then to "Richard Martin" and then to "XPAD"
• Citrix troubleshooting for Mac: http://users.jet.efda.org/pages/data-rca/CitrixClients.html
• Citrix troubleshooting for remote connection including frequently asked questions: http://users.jet.efda.org/pages/data-rca/connecting.html

Back to FEPP