--
RamonaValenzuelaPerez - 2012-06-21
Proton Detector: Charged Fusion Products Diagnostic
Please note that though Florida International Univeristy (FIU) is collaborating with the Princeton Plasma Physics Laboratory and the Culham Centre for Fusion Energy (CCFE), this TWiki page is maintained by FIU collaborators and the page is hosted by FIU. Please see the CCFE Information section for the address of the Wiki page maintained and hosted by the CCFE.
Proton Detector (PD)
The Proton Detector’s (PD) data will yield pulse height spectra created by Protons and Tritons emitted from the plasma during Neutral Beam Injection. Validation of the subsequent PD fast ion emission plasma profile will involve MAST Neutron Camera data. Preliminary testing of PD electronics and data acquisition software occurred during neutral beam, toroidal field coil, poloidal field coil, and ELM coil testing in March 2013. Probe head manufacturing and software development will continue to prepare for a July 2013 installation in MAST. [Excerpt contributed to the Annual Report of the EURATOM/CCFE Fusion Programme 2012/13]
Summer Data Collection Dates
- Diagnostic installation: July 22nd - August 12th 2013
- Parasitic Data collection: August 15th - August 16th & September
- Dedicated Data collection: August 19th - August 23rd
- Onsite collaborators (at CCFE)
- July 22nd - September 13th: Ramona Perez (FIU)
- August 5th - August 16th: Werner Boeglin (FIU), Adrianna Angulo (FIU), Carlos Lopez (FIU), Omar Leon (FIU), Pierre Avila (FIU)
- August 12th- August 23rd: Doug Darrow (PPPL)
- FP-001 & FP-005 Planning Meeting: August 5th, August 12th
PD Data Collection Updates
Parasitic Data Collection
- Thursday August 15th
- Friday August 16th
- Friday August 23rd
Dedicated Shots Data Collection
- Monday August 19th
- Tuesday August 20th
- Wednesday August 21st
- Thursday August 22nd
PD Installation Updates
PD_Status_Report.pdf
PD_INSTALLATION_081613.pdf
Proton Detector Completely Installed and Operational August 15th
Electrical Design Review
Date
- Wednesday June 19th, 2013
- 9:00 AM FL, 14:00 Culham
Attendees
- FIU: Adrianna Angulo, Werner Boeglin, Omar Leon, Ramona Perez
- MAST: Scott Y Allan, Richard Martin, Ken McClements, Paul Stevenson, Nigel Thomas-Davies
- PPPL: Doug Darrow
EDR Materials
Supporting Documents (for reference if needed)
Noise Testing
Dates
- Onsite noise testing: March 2013
- Remote noise testing: March - May 2013
Collaborators travelling to MAST
- Ramona Perez: March 11th - March 24th 2013
- Werner Boeglin: March 11th - March 15th 2013
- Doug Darrow: March 11th - March 20th 2013
Instructions to run DAQ Program (if need be)
Information for sending equipment back to FIU after remote testing
Radiation source
Electrical Design
- cable_block_diagram.pdf
- All cable lengths used will be the same for the July data collection
- MAST reciprocating probe cable lengths were simulated for noise testing
Mechanical Design
- Changes to probe head orientation angles made during noise testing
March 19th, 2013 Noise Testing Group Meeting
Prototype
Installation: January 2013
Comments:
- Prototype type dimensions fit into RP access cube (reduction in probe head diameter requested for greater ease of installation)
- Our prototype RP connector may have become distorted during the welding of the connector to the prototype shell (this issue was fixed at CCFE)
- A dummy RP shaft end was created and sent to FIU to test the fit of the RP connector before bringing the diagnostic for the summer data collection
- Vacuum vent hole had to be drilled in top of prototype to bake for RP installation (at CCFE)
Machine Drawings:
Mechanical Design Review
Current Mechanical Design
MAST Mechanical Design Review Materials
Date
Materials
Supporting Documents (for reference if needed)
Preliminary Mechanical Design - MAST
Date
Materials
Preliminary Mechanical Design - PPPL
Date
Materials
FIU Experimental Plasma Physics (FEPP) Group Information
- FEPP group page: http://phy.fiu.edu/twiki/bin/view/TWiki/FEPP
- Proceedings of the 18th Topical Conference on High-Temperature Plasma Diagnostics, Wildwood, New Jersey, May 2010
- Rev. Sci. Instrum. 81, 10D301 (2010); doi: 10.1063/1.3464262
- Group Members
CCFE Useful Links
Log onto CCFE Citrix network
Citrix errors and troubleshooting
Fusionwiki pages of interest
Current shot information
Obtaining data from past shots
- Past session logs: go to Fusionwiki, then to the "Results and Analysis" section, then to the "Session Logs" subsection, then to "SL", and then pick date
- Click on the shot number to open a pdf which has a collection of waveforms from plasma and toroidal field currents to the neutron rate
- Quick Search for Shot Data: go to Fusionwiki, then to the "Results and Analysis" section, then to the "Displays" subsection, then to "Data"
- Enter the shot number and select relevant data to view
- XPAD information (if logged into a server on the network)
- within the CCFE network go to http://fusweb2.fusion.culham.ukaea.org.uk/ then to "Richard Martin" and then to "XPAD"
- go to neutronics and ANU_NEUTRONS for fission chamber data
- go to Magnetics for Mirnov coil data (you can also view this data by running the specview command on a server in the network)
- Neutron camera data (if logged into a server on the network): go to Marco Cecconello's "ProcessedData" folder, then to the appropriate shot directory, then use 'eog' or 'okular' or some other command to view the .png files